Glossary

The language of wrapping.

The terms you will hear from installers and in quotations, explained simply.

20 terms

A

Architectural film

Adhesive-backed film made for interior surfaces such as cabinets, doors, walls, counters and furniture, available in wood, stone, solid-colour and textured designs. Read more

D

Data sheet

The manufacturer's technical document for a film, listing its properties, test results and care guidance. Ask your installer for it. Read more

Degreasing

Removing cooking oils and residue so adhesive can bond to the surface rather than to a film of grease.

Delamination

When a laminate or veneer layer separates from its core. Film cannot fix it. Read more

E

Edge sealing

Finishing the edges of the film so moisture and wear cannot lift it. Edges are where failure usually begins. Read more

Embossed texture

A surface texture on the film you can feel, such as wood grain, which helps it look and feel more natural. Read more

F

Fire-rated door

A door certified to resist fire for a set time. Altering one can affect compliance, so confirm requirements before wrapping. Read more

Flame-spread rating

A test result (for example under ASTM E84) describing how quickly flame spreads across a surface. Ratings vary by product and pattern, so check the data sheet for the specific film. Read more

G

Gloss

A high-sheen, reflective finish that shows fingerprints, dust and streaks readily. Read more

H

Heat zone

An area exposed to sustained heat, such as beside a hob or oven, where film needs protection or a different approach. Read more

L

Laminate

A rigid decorative sheet bonded to a board. It forms part of the cabinet itself, unlike film, which is applied afterwards.

M

MDF

Medium-density fibreboard, a common cabinet core material. Strong when dry but prone to swelling when wet.

Matte

A low-sheen finish that reduces glare. May show oils and fingerprints depending on the film. Read more

P

Preparation

Cleaning, degreasing and correcting minor defects before applying film. The step that most affects how well it bonds. Read more

S

Satin

A subtle sheen between matte and gloss. Read more

Seam

The joint where two pieces of film meet. Planned seams and matched patterns are signs of careful installation.

Substrate

The surface the film is applied to, for example MDF, laminate, metal or a painted wall. The substrate decides whether wrapping is suitable. Read more

Swelling

Expansion of board materials such as MDF or chipboard when they absorb water. A reason not to wrap. Read more

T

Telegraphing

When texture, grout lines, dents or damage show through the film because it follows the surface beneath. Read more

V

Veneer

A thin layer of real wood on a board. Sensitive to moisture and sun if poorly sealed.