Kitchen cabinets
Often suits cabinet fronts that are structurally sound and stable, away from direct flame and constant steam.
What to photograph
- The whole run of cabinets, from the front
- Close-ups of door edges and corners
- The areas around the hob and sink
- Handles and hinges
Damage that matters
- Swelling, especially near the sink
- Laminate lifting at the edges
- Flaking or peeling coatings
- Water damage at the base
Needs inspection first
- Surfaces close to a hob
- Deeply textured or very worn fronts
Countertop
A flat, sound worktop can be wrapped. Film is not heat- or cut-proof like stone, so trivets and chopping boards are essential.
What to photograph
- The full top, from above
- Edges and joins
- The area around the sink and hob
Damage that matters
- Chips, cracks or lifting laminate
- Moisture swelling
- Burn or heat marks
Needs inspection first
- Worktops next to a hob
- Surfaces that see heavy daily cutting
Door
Flat or lightly profiled interior doors in good condition suit wrapping well, and frames can be matched.
What to photograph
- The whole door and its frame
- The handle and lock area
- The bottom edge
- Any damage, close up
Damage that matters
- Warping
- Deep carving or heavy profile
- Peeling previous finishes
Needs inspection first
- Fire-rated doors, which are not altered until compliance is confirmed
Wardrobe
Usually possible when panels are flat and the hardware works. Mirrored faces are normally left as they are.
What to photograph
- The whole wardrobe, from the front
- Panel edges and corners, close up
- Hinges, handles or sliders
- The base of each panel
Damage that matters
- Swollen panels near the floor
- Delaminating edges
- Loose hinges
Needs inspection first
- Heavily textured panels
- Panels with repairs or mixed materials
Furniture
Often possible for pieces with flat or gently curved faces on a stable structure. Upholstery, fabric and rattan cannot be wrapped.
What to photograph
- Each piece, from the front
- The top surface, close up
- Edges and corners
- Any damage
Damage that matters
- Peeling veneer
- Water rings or swelling
- Wobbly or unstable joints
Needs inspection first
- Pieces with carved or very textured surfaces
Wall or panel
A smooth, sound wall or panel can take film for a feature wall, column or accent area.
What to photograph
- The whole wall, from a distance
- Corners, sockets and switches
- Any stains, cracks or texture, close up
Damage that matters
- Damp or mould marks
- Flaking paint
- Rough or crumbling plaster
Needs inspection first
- Heavily textured walls
- Walls with a history of damp
Office joinery
Office doors, partitions, storage and furniture can often be updated without a full fit-out, with scope and access agreed first.
What to photograph
- Each run of joinery or partition
- Door types and frames
- Access routes and working-hour limits
Damage that matters
- Delaminating laminate
- Edges that are lifting
- Damaged or swollen panels
Needs inspection first
- Fire-rated doors
- Anything needing building-management approval
Reception desk
Counters and front panels can be refreshed in a finish that suits the brand, on sound structures.
What to photograph
- The front, top and ends
- High-contact edges and corners
- Cable ports and cut-outs
Damage that matters
- Chips or loose panels
- Heat marks from equipment
- Worn edges
Needs inspection first
- Counters with heat sources
- Heavily damaged tops
Lift cabin
Lift cabin walls, doors and surrounds can be renewed in durable film, with building-management approval.
What to photograph
- Each cabin wall
- The doors and surrounds
- Controls, signage and emergency equipment (these stay clear)
Damage that matters
- Dents or deformed panels
- Peeling existing film
- Heavily scratched metal
Needs inspection first
- Building-management approval
- Lift controls and emergency equipment stay unwrapped
This is a first guide, not a verdict. Final suitability is confirmed after inspection, because the condition of the surface underneath decides the result.