FAQ

Frequently asked questions.

Honest answers, including where the answer depends on your surface, the film or an inspection.

35 questions

The basics

What is interior wrapping?
Interior wrapping covers existing surfaces such as cabinets, doors, wardrobes, counters and furniture with adhesive architectural film, so they take on a new colour, grain or texture without being replaced.

Read the full explanation

Is architectural film the same as the vinyl used on cars?
They are related but not the same. Architectural films are made for interior surfaces, with finishes, textures and detailing suited to rooms people live and work in. Ask any installer for the exact product and its data sheet.
Is wrapping the same as painting?
No. Wrapping applies a film, painting applies a coating. Wrap offers wood, stone and marble looks and is often easier to reverse. Paint can be touched up and gives flat colour. Both need sound surfaces.

Compare finishes

Does wrapping look like real wood or marble?
Good films capture grain and veining convincingly at normal viewing distance, and some are embossed so they feel textured. Up close it is still a film, which is why samples in your own room matter.
Is wrapping permanent?
No. It is a surface layer that can be removed, though how cleanly depends on the film, the surface and how long it has been in place.

How removal works

Surfaces and suitability

Can old kitchen cabinets be wrapped?
Often yes, if the panels are structurally sound and the surface is stable. Swollen, delaminating or water-damaged panels are not suitable because film cannot repair them.

Kitchen wrapping

Can countertops be wrapped?
A flat, sound worktop can be. Film is not heat- or cut-proof like stone, so trivets and chopping boards are essential.

Countertop guide

Can doors be wrapped?
Flat or lightly profiled interior doors in good condition suit it well. Deep carvings, warping and damage do not, and fire-rated doors should not be altered without confirming compliance.

Door wrapping

Can wardrobes be wrapped?
Usually, when panels are flat and hardware works. Mirrored faces are normally left as they are.

Wardrobe wrapping

Can furniture and office furniture be wrapped?
Often, particularly desks, counters and storage with flat faces. Upholstery, fabric and rattan cannot be wrapped.

Furniture wrapping

Can bathroom surfaces be wrapped?
Vanity fronts and some walls can be, but bathrooms are demanding because of steam and standing water. Edge sealing and the condition of the surface matter most, and shower zones are generally poor candidates.
What surfaces should not be wrapped?
Swollen or rotting panels, flaking paint, damp surfaces, deeply textured or crumbling finishes, fabric, and areas under sustained heat without protection.

Full list

Can I wrap a tiled wall or splashback?
Sometimes. Flat tiles with narrow grout can work. Deep grout lines or strong texture can show through, so we check first.

Backsplash wrapping

Can floors be wrapped?
Only suitable flat, sound floors, and only with floor-rated film. Floors take far more wear than cabinets, so suitability depends on traffic and moisture.

Floor wrapping

Heat, moisture and durability

Can wrapped surfaces handle heat?
Not like stone or metal. Sustained heat near a hob or oven can lift film, so heat zones need protection or a different approach.
What about humidity in Dubai kitchens and bathrooms?
Everyday humidity is generally manageable. Water getting under unsealed edges is the real risk, so edge detailing and preparation matter more than the climate itself.
How long does wrapping last?
It varies with film quality, preparation, edges, heat, moisture, sunlight and care. Treat any single quoted number with caution and ask what the warranty covers in writing.

What decides lifespan

Why do wraps peel or bubble?
The usual causes are poor preparation (grease or dust under the film), unsealed edges, trapped air, heat and water. Most are avoidable with good installation and use.
Can a damaged section be repaired?
Small sections can sometimes be re-wrapped, though matching an aged film depends on the product. Film cannot be sanded or touched up like paint.

Care and cleaning

How do I clean wrapped cabinets?
Mild soapy water and a soft cloth, then dry. Avoid abrasive pads, bleach, ammonia and strong solvents unless your installer confirms they are safe.

Cleaning guide

How do I deal with grease?
A gentle baking-soda paste applied with a soft cloth works for many marks. Test a hidden spot first and avoid hard scrubbing.
What should I avoid on a wrapped surface?
Hot cookware, sharp knives, steam jets at edges, abrasive scourers and solvents.

Process and timing

How are surfaces prepared?
Cleaned, degreased and any minor defects corrected, so the adhesive bonds to the surface rather than to residue. Preparation affects the result more than most people expect.
How long does installation take?
It depends on size, number of panels, finish and condition. We confirm the programme after assessment rather than quoting a fixed time.
Does the property need to be empty?
Surfaces and the area around them need clearing. Whether you can stay in the property depends on the job, and we explain what applies.
Can commercial premises stay open?
Often with phased or out-of-hours work, depending on layout, noise and building rules.

Commercial wrapping

Do I need landlord or building approval?
If you rent, get written permission first. Shared areas such as lifts, lobbies and corridors normally need building-management approval.

Finishes and design

What finishes are available?
Wood-look, marble-look, stone-look, matte solid colours, metallics and textures, in a wide range of tones.

Finish library

How do I choose a finish?
Consider the light, how hard the surface is used, the sheen and the materials around it, then confirm with physical samples in your room.

Choosing guide

Which finish hides marks best?
Finishes with some grain, pattern or texture usually hide wear better than plain gloss or very dark flat colours.
Can you match a brand colour?
We can propose the closest available finishes and show samples. Exact matching depends on the film range.

Quotes and getting started

Can I send photos for assessment?
Yes. Photos of the surfaces, edges and any damage give early guidance. Final suitability is confirmed on inspection.

Send photos

How can I get an accurate quotation?
A firm quote depends on measurements, materials and condition. Photos give a good first indication and we may confirm details on site.

Try the estimator

How does wrapping compare with replacing cabinets?
Wrapping changes the surface of sound cabinets. Replacement changes the cabinets themselves. Choose based on what is actually wrong.

Wrapping or renovation tool

What affects the cost?
Size, scope, surface condition, film and finish, detail work, access and warranty. We do not publish a headline price because it would mislead.

What affects cost

Still have a question?

Ask us with photos.

The best answers come from seeing your actual surface.